| Version 8 (modified by , 11 years ago) ( diff ) |
|---|
How to use Switch-Science USB Stick. スイッチサイエンスUSBスティックの使い方 =
Schematic 回路図
PDF Schematic is here. OHS_SSCI_STICK.pdf
Eagle Cad Schematic and board data Archive is here. OHS_SSCI_STICK.zip
Switch-Science USB Stick is Fantastic USB device for Open Hardware Summit comers.
You can see sparkling three colors LEDs that have many brink patterns, if insert the USB Stick to your any USB Slot.(*1)
It has three colors LEDs and AVR micro-controller that was made by Atmel corporation.
Notice
(*1) Switch-Science USB Stick is a little thin as USB standard board.
If the USB Stick can not match your USB Slot, you should paste some paper (ex.name card) to the USB Stick backside please.
Attachments (11)
- OHS_SSCI_STICK_PIN.jpg (43.2 KB ) - added by 11 years ago.
- OHS_SSCI_STICK_PAPER.jpg (42.1 KB ) - added by 11 years ago.
- OHS_SSCI_STICK_MOVIE.m4v (5.3 MB ) - added by 11 years ago.
- OHS_SSCI_STICK_QUARTET.jpg (35.2 KB ) - added by 11 years ago.
-
OHS_SSCI_STICK.pdf
(16.8 KB
) - added by 11 years ago.
Schematic file
-
OHS_SSCI_STICK.brd.pdf
(12.0 KB
) - added by 11 years ago.
Board file
- OHS_SSCI_STICK.zip (21.7 KB ) - added by 11 years ago.
- OHS_SSCI_STICK.png (24.2 KB ) - added by 11 years ago.
- OHS_SSCI_STICK.brd.png (42.5 KB ) - added by 11 years ago.
- OHS_SSCI_STICK.hex (701 bytes ) - added by 11 years ago.
- OHS_SSCI_STICK.asm (3.3 KB ) - added by 11 years ago.
Note:
See TracWiki
for help on using the wiki.
